Xbox 360 Controller Driver (A PS3 controller driver for Windows 7 and older) Note: Most of you may already have these installed but it’s worth checking to avoid problems in the long run, especially if you aren’t sure if you have these in the first place. I think you may get a new PS3 controller, probably it’s your first one. That’s great. Since you’re reading this article, you must be looking for a guide to use a PS3 controller on your Windows PC. You’re on the right place. The top easy but true guide here to help you connect your PS3 controller with Windows. Let’s get started. To operate as a wireless controller, our wireless controllers require the use of their included USB Controller Adapter. Insert the USB. How to Connect PS3 Controller to Windows 10, 8.1 OR 7 On PC 2018 No. Controller wireless using a.
Recent Versions of RetroPie (3.0+, 4.0+)
The most recent versions of RetroPie include the packages needed for setting up a PS3 controller. Connecting over USB is Plug-and-Play--literally just plug your controller into the Pi while EmulationStation is running and it should detect a gamepad to configure. Connecting a PS3 controller via Bluetooth requires installation of a special PS3 driver located in RetroPie setup.
Two drivers are available:
Configuring a PS3 controller to connect via Bluetooth
Before booting the Raspberry Pi, make sure that a supported Bluetooth adapter is connected (for the Pi 3, onboard Bluetooth works perfectly as of RetroPie 4.0+). If you have a Playstation 3 console near by, make sure it is totally powered off--either unplugged or switched off in the back--because the PS3 controller may try to automatically pair with the console otherwise. While a separate powered USB hub is not required to set up a controller, be mindful of your overall power draw when attaching peripherals. If you are overclocking, for example, it will be much safer to use a powered USB hub than drawing current from the Pi itself.
After your Pi boots up, you need to enter RetroPie setup. You can do this one of two ways:
Using the RetroPie-Setup GUI to configure the PS3 Controller Bluetooth Connection (for
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |